TEMPERATURE
Internal Channel Temperature SensorResistance Temperature Detector (RTD)
Internal Channel Temperature Range-20 °C to +60 °C
Internal Channel Temperature Resolution0.01 °C
Internal Channel Temperature Calibrated Accuracy±0.5 °C
HUMIDITY
Humidity SensorRelative Humidity Sensor
Humidity Range0 %RH to 95 %RH
Humidity Resolution0.1 %RH
Humidity Calibrated Accuracy±3.0 %RH, ±2.0 %RH typical @ 25 °C (10 to 90 %RH; 5 °C to 55 °C)
PRESSURE
Pressure SensorSilicon
Pressure Range250 mbar to 1300 mbar
Pressure Resolution0.02 mbar
Pressure Calibrated Accuracy10 mbar
WIRELESS
RF Baud Rate250,000
Output Power+0 dBm typical
Receiver Sensitivity-95 dBm typical
Typical outdoors Line of sightUp to 2000 ft
Typical Indoors line of sightUp to 500 ft
GENERAL
Memory10,752 readings per channel
Reading Rate1 reading every second up to 1 reading every 24 hours
Baud Rate250,000
LED IndicatorsGreen, Blue & Red
Battery Life5 years typical at a 15 minute reading rate
MaterialABS plastic
Dimensions3.0 in x 3.5 in x 0.95 in (76.2 mm x 88.9 mm x 24.1 mm) - Data logger only
Operating Environment-20 °C to +60 °C (-4 °F to +140 °F), 0 %RH to 95 %RH non-condensing, 0.002 PSIA to 100 PSIA
Required Interface PackageRFC1000
ApprovalsUS(FCC), CA(IC), CE, South Korea(KCC)

TEMPERATURE
Internal Channel Temperature SensorResistance Temperature Detector (RTD)
Internal Channel Temperature Range-20 °C to +60 °C
Internal Channel Temperature Resolution0.01 °C (0.02 °F)
Internal Channel Temperature Calibrated Accuracy±0.5 °C

HUMIDITY
Humidity SensorRelative Humidity Sensor
Humidity Range0 %RH to 95 %RH
Humidity Resolution0.1 %RH
Humidity Calibrated Accuracy±3.0 %RH, ±2.0 %RH typical @ 25 °C
(10 %RH to 90 %RH; 5 °C to 55 °C)

WIRELESS
RF Carrier Frequency2.45 GHz IEEE 802.15.4 ultra-low power MadgeNET Wireless Transceiver with fully by-directional communication.
RF Baud Rate250,000
Output Power+0 dBm typical
Receiver Sensitivity-95 dBm typical
Typical outdoors Line of sightUp to 2000 ft
Typical Indoors line of sightUp to 500 ft

GENERAL
Memory16,128 readings per channel
Reading Rate1 reading every second up to 1 reading every 24 hours
Baud Rate250,000
LED IndicatorsGreen, Blue & Red
Battery Life3 years typical at a 1 minute reading rate
MaterialABS plastic
Dimensions3.0 in x 3.5 in x 0.95 in (76.2 mm x 88.9 mm x 24.1 mm) - Data logger only
Operating Environment-20 °C to +60 °C (-4 °F to +140 °F) 0 %RH to 95 %RH non-condensing
Required Interface PackageRFC1000
ApprovalsUS (FCC), CA (IC), CE, South Korea (KCC)
TEMPERATURE
Internal Channel Temperature SensorInternal Semiconductor
Internal Channel Temperature Range-20 °C to +80 °C
Internal Channel Temperature Resolution0.01 °C
Internal Channel Temperature Calibrated Accuracy±0.5 °C

WIRELESS
RF Carrier Frequency2.45 GHz IEEE 802.15.4 ultra-low power MadgeNET Wireless Transceiver with fully by-directional communication.
Output Power+0 dBm typical
Receiver Sensitivity-95 dBm typical
Typical outdoors Line of sightUp to 2000 ft
Typical Indoors line of sightUp to 500 ft

GENERAL
Memory32,256 readings per channel
Reading Rate1 reading every second up to 1 reading every 24 hours
Baud Rate250,000
LED IndicatorsGreen, Blue & Red
Battery Life5 years typical at a 1 minute reading rate
MaterialABS plastic
Dimensions3.25 in x 3.5 in x 0.95 in (82.6 mm x 88.9 mm x 24.1 mm) - Data logger only
Operating Environment-20 °C to +80 °C, 0 %RH to 95 %RH non-condensing
Required Interface PackageRFC1000
ApprovalsUS (FCC), CA (IC), CE, South Korea (KCC)
TEMPERATURE
Temperature SensorExternal 100 Ω Resistance Temperature Detector (RTD)
Temperature Range-200 °C to +850 °C
Temperature Resolution0.001 °C
Temperature Calibrated Accuracy±0.01° Ω (±0.05 °C)
Internal Channel Temperature SensorInternal Semiconductor

PROBES (ORDER SEPARATELY)
Precision 100 Ohm, 4 wire RTD probe, with a 6" or 12" sheath.
100 Ohm, 4 wire RTD probe with metal strain relief wrapped. Available with a 6" or 12" sheath.

WIRELESS
RF Carrier Frequency2.45 GHz IEEE 802.15.4 ultra-low power MadgeNET Wireless Transceiver with fully by-directional communication.
Output Power+0 dBm typical
Receiver Sensitivity-95 dBm typical
Typical outdoors Line of sightUp to 2000 ft
Typical Indoors line of sightUp to 500 ft

GENERAL
Memory16,128 readings per channel
Reading Rate1 reading every second up to 1 reading every 24 hours
Baud Rate250,000
LED IndicatorsGreen, Blue & Red
Battery Life3 years typical at a 1 minute reading rate
MaterialABS plastic
Dimensions3.0 in x 3.5 in x 0.95 in (76.2 mm x 88.9 mm x 24.1 mm) - Data logger only
Operating Environment-20 °C to +60 °C, 0 %RH to 95 %RH non-condensing
Required Interface PackageRFC1000
ApprovalsUS (FCC), CA (IC), CE, South Korea (KCC)
TEMPERATURE
Internal Channel Temperature SensorSemiconductor
Internal Channel Temperature Range-20 °C to 60 °C
Internal Channel Temperature Resolution0.1 °C
Internal Channel Temperature Calibrated Accuracy±1.0 °C
Remote Channel Temperature SensorType K Thermocouple (Included)

PROBES
Thermocouple Probe Assembly for 30ml, 60ml and 250ml Glycol Bottles.

GENERAL
Memory16,128 readings per channel
Reading Rate1 reading every second up to 1 reading every 24 hours
Baud Rate250,000
Cold Junction CompensationAutomatic based on internal channel
Battery Life3 years typical at 1 minute reading rate
MaterialABS Plastic
Dimensions3.0 in x 3.5 in x 0.95 in (76.2 mm x 88.9 mm x 24.1 mm) - Data logger only
Operating Environment-20 °C to +60 °C, 0 %RH to 95 %RH non-condensing
Required Interface PackageRFC1000 (wireless); USB to Mini USB Cable
TEMPERATURE
Internal Channel Temperature SensorInternal Semiconductor
Internal Channel Temperature Range-20 °C to +60 °C
Internal Channel Temperature Resolution0.1 °C
Internal Channel Temperature Calibrated Accuracy±0.1 °C
Remote Channel Temperature SensorThermocouple types: J, K, T, E, R, S, B, N
Remote Channel Temperature RangeThermocouple dependent
Remote Channel Temperature ResolutionThermocouple dependent
Remote Channel Temperature Calibrated AccuracyThermocouple dependent
PROBES (ORDERED SEPARATELY)
- HP-1 is an oven hotplate thermocouple that is designed for monitoring and recording the temperature of stove top griddles, burners and other flat surfaces. It can measure temperatures up to 390°F (200°C) and may be used with electric stoves. To use, simply connect the HP-1 to a thermocouple based temperature data logger, such as the TC101A or TCTemp2000, then start the logger. Place the HP-1 directly on the flat surface, and position the data logger a safe distance away from the heat source. Once monitoring is complete, data can be downloaded and analyzed using the MadgeTech data logger software.
- 304 SS 3/16" dia. Available in types J, K and T with a 6" or 12" sheath.
Temperature range for sheath: 900°C
Temperature range for lead wire: 260°C
- 24 gauge, teflon insulated, thermocouple with mini plug and welded tip. Available in type J, K, T, and E, with a 36" or 72" cable.
WIRELESS
RF Carrier Frequency2.45 GHz IEEE 802.15.4 ultra-low power MadgeNET Wireless Transceiver with fully by-directional communication.
Output Power+0 dBm typical
Receiver Sensitivity-95 dBm typical
Typical outdoors Line of sightUp to 2000 ft
Typical Indoors line of sightUp to 500 ft
GENERAL
Memory16,128 readings per channel
Reading Rate1 reading every second up to 1 reading every 24 hours
Baud Rate250,000
LED IndicatorsGreen, Blue & Red
Battery Life3 years typical at a 1 minute reading rate
MaterialABS plastic
Dimensions3.0 in x 3.5 in x 0.95 in (76.2 mm x 88.9 mm x 24.1 mm) - Data logger only
Operating Environment-20 °C to +60 °C, 0 %RH to 95 %RH non-condensing
Required Interface PackageRFC1000
ApprovalsUS (FCC), CA (IC), CE, South Korea (KCC)
The RFCurrent2000A is a wireless data logger with display, designed to measure and record DC current signals. The data logger can connect directly to low-level DC current sources which makes it ideal for (PV) Photovoltaic research to monitor current sourced from solar cells over time, battery usage studies, energy monitoring studies and other DC current monitoring applications. The RFCurrent2000A can also be interfaced with a wide range of current output sensors such as flow meters, pH transmitters and more. Through the software, the device can be programmed with engineering units, which convert the current readings into a different unit of measure such as flow rate. The engineering unit is available for display on the LCD screen as well as in the software. The RFCurrent2000A is available in 20 mA, 160 mA or a 3 A measurement range.
MadgeTech's new RFC1000-CE is a powerful wireless receiver for use with the RFOT, Therm-A-lert and RF2000A Series of data loggers and is CE approved for the European market. The RFC1000-CE transmits to other RFC1000-CEs up to 2500 ft outdoors/line of sight, 700 ft typical indoors/urban.

The RFC1000-CE transmits to data loggers up to 2000 ft outdoors/line of sight, 500 ft typical indoors/urban. Additional RFC1000-CEs can be used as repeaters to transmit greater distances. This new RFC1000-CE also includes an external antenna, allowing more flexibility with mounting positions in both orientation and proximity to metal walls. This may be used as a repeater, or directly plugged into the PC.
CURRENT
Current Range20 mA: -2 mA to 30 mA
±160 mA: ±160 mA
±3 A: ±3 A
Current Resolution20 mA: 0.5 μA
±160 mA: 5 μA
±3 A: 100 μA
Current Calibrate Accuracy20 mA, 160 mA: ±0.05 %FSR
3 A: ±0.15 %FSR
Current Input Impedance20 mA: 10 Ω, ±1%
±160 mA: 1 Ω, ±1%
±3 A: <0.05 Ω
WIRELESS
RF Carrier Frequency2.45 GHz IEEE 802.15.4 ultra-low power MadgeNET
Wireless Transceiver with fully by-directional communication.
Output Power+0 dBm typical
Receiver Sensitivity-95 dBm typical
Typical outdoors Line of sightUp to 2000 ft Typical Indoors line of sightUp to 500 ft
GENERAL
Memory32,256 readings per channel
Reading Rate1 reading every second up to 1 reading every 24 hours
Baud Rate250,000
LED IndicatorsGreen, Blue & Red
Battery Life4 years typical at a 15 minute reading rate
MaterialABS plastic
Dimensions3.0 in x 3.5 in x 0.95 in (76.2 mm x 88.9 mm x 24.1 mm) - Data logger only
Operating Environment-20 °C to +60 °C, 0 %RH to 95 %RH non-condensing
Required Interface PackageRFC1000 (wireless); USB to Mini USB Cable
ApprovalsUS (FCC), CA (IC), CE, South Korea (KCC)
To help customers comply with 21 CFR Part 11 requirements, MadgeTech has developed the MadgeTech 4 Secure Software Validation Package. The software ensures standards in which electronic files are considered equivalent to paper records, saving time, and effort. MadgeTech Secure Software contains criteria such as electronic signatures, access codes, secure data file, and an audit trail which meet the requirements of 21 CFR Part 11 and helps provide data integrity IQ/OQ/PQ protocols can be purchased and implemented to validate that the software has been installed and is operating correctly. Additional support is available for full software training. The layout of the secure software is similar to the Madgetech Standard Software version, allowing users to easily learn the additional features. The software is not compatible with all MadgeTech data loggers.
MadgeTech 4 Standard Version: 4.1.10.0
The MadgeTech Data Logger Software is simple, easy-to-use, Windows-based software that enables the user to effortlessly collect, display, and analyze data. A variety of powerful tools can be used to examine, export, and print professional quality reports with just a click of the mouse.
Additional Software Features
Multiple Graph Overlay
Zoom In / Zoom Out
Timeslice
Lethality Equations (F0, PU)
Mean Kinetic Temperature
Full Time Zone Support
Data Annotation
User Friendly File Management
Min. / Max. / Average Lines
Automatic Report Generation
Summary View
Madgetech
Madgetech

Amerykański producent szerokiej gamy rejestratorów  
wielkości fizycznych: temperatury, wilgotności względnej,  
ciśnienia względnego i absolutnego, a także wielkości  
elektrycznych i geometrycznych.